Table of Contents
Advertisement
23 IN.
3-1/2 IN.
NO COMBUSTIBLES
IN THIS AREA
39 IN.
4 IN.
Figure 10.6
38
1/2 IN. BUILDING MATERIAL
(MAY BE COMBUSTIBLE)
COMBUSTIBLE
FRAMING
FACTORY-SUPPLIED
1/2 IN.
NON-COMBUSTIBLE
BOARD
Heat & Glo • ESC-42ST-IFT Installation Manual • 2464-980 Rev. C • 7/17
C. Decorative Fronts
Only decorative fronts certified for use with this appli-
ance model may be used. Contact your dealer for a
list of decorative fronts that may be used. Once you
have determined what kind of decorative front and
finishing material is going to be used on the fireplace,
you may use the table below which shows the deco-
rative front models and the finishing material thick-
ness allowed.
FS-42STIFT-XX
FSA-42STIFT-XX
(REQUIRES ARCHKIT-ESC-42ST)
Figure 10.7 Approved Decorative Fronts for ESC-42ST-IFT
Note: Firescreen sits out 1-1/2 inches from the face of
the fireplace. When using thin finishing material, you may
want to use thicker non-combustible backer board to bring
the finishing material flush with the firescreen. This is not
required.
Advertisement
Table of Contents
