Tcm/Tpm Adapter Replacement (For China Only) - Lenovo ThinkSystem SR860 Maintenance Manual

TCM/TPM adapter replacement (for China only)

Use this procedure to remove or install the TCM/TPM adapter.
Remove the TCM/TPM adapter (for China only)
Use this information to remove the TCM/TPM adapter.
Before removing the TCM/TPM adapter:
1. Read the safety information and installation guidelines (see "Safety" on page iii and "Installation
Guidelines" on page 59).
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
"Power off the server" on page 10).
3. If the server is installed in a rack, remove the server from the rack.
4. Remove the top cover (see "Remove the top cover" on page 146).
5. Remove the PCIe expansion tray (see "Remove the PCIe expansion tray" on page 149).
6. Disconnect the USB 3.0 cable of operator panel tray assembly, and remove it vertically from the system
board.
Figure 133. Removing USB 3.0 connector vertically
To remove the TCM/TPM adapter, complete the following steps:
Watch the procedure. A video of the process is available:
• Youtube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
• Youku: http://v.youku.com/v_show/id_XMzMyODU3NTY2NA==.html?spm=a2hzp.8253876.0.0&f=51276390
Step 1. Locate the TCM/TPM connector on the system board (see "System-board connectors" on page
24).
.
Chapter 3 Hardware replacement procedures
143