Control Panel - Ricoh 8035 Copy Reference Manual

Control Panel

Note
❒ This illustration shows the control panel of the machine with options fully in-
stalled.
User Tools/Counter
Screen
Contrast
Copy
Document Server
Facsimile
Printer
Scanner
1.
Screen Contrast knob
Adjusts the brightness of the display pan-
el.
2.
Indicators
Shows errors and machine status.
• d: Add Staple indicator
• D: Add Toner indicator
• B: Load Paper indicator
• L: Service Call indicator
• M: Open Cover indicator
• x: Misfeed indicator
See "Control Panel", General Settings
Guide.
3. {User Tools/Counter} key
• User Tools
Press to change the default and condi-
tions to meet your requirements.
• Counter
Press to check or print the counter val-
ue.
4.
Display panel
Shows operation status, error messages,
and function menus.
5. {Check Modes} key
Press to check the entered copy job set-
tings.
Check Modes Program
GHI
PRS
6.
{Program} key
Press to select the program mode. See
p.75 "Programs".
7. {Clear Modes} key
Press to clear previously entered copy job
settings.
8. {Energy Saver} key
Press to switch to and from the Energy
Saver mode. See General Settings Guide.
9.
{Interrupt} key
Press to interrupt a long copy job to make
copies. See p.18 "Interrupt Copy" .
10.
Main power indicator
The main power indicator goes on when
you turn on the main power. The power
indicator lights when the power is on.
Important
❒ Do not turn off the main power
switch while the power indicator
goes on or is flashing. The hard
disk may malfunction.
11.
Operation switch
Press to turn the power on (the On indi-
cator goes on). To turn the power off,
press again (the On indicator goes off).
Clear Modes Energy Saver
Main
Interrupt
Power
On
Sample Copy
ABC
DEF
Start
JKL MNO
Clear/Stop
TUV WXY
Enter
OPER
5