Table of Contents
Advertisement
replace with the outlet cover from the rear left-hand side.
These covers should be gently pried at the sides to
prevent damage.
Front venting
Front venting is the only recommended option for
venting into the room. The dryer is set up for front
venting when it leaves the factory.
All efforts should be made
to vent the dryer externally
if possible, to avoid
moisture build up in the
area around the dryer.
Inverted wall mounting installation
Your dryer has been designed to be inverted and mounted on the wall above a washer or tub. A wall mounting kit must
be used. Inverting allows access to the dryer control panel.
Tools and parts required:
• Drill and 3 mm bit
• Phillips head screwdriver
Wall mounting kit includes:
• 2 x Plastic spacers
• 2 x Wall hanging brackets
• 2 x Hanging hook
• 4 x Wood screws
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE6060P1/User_Guide_DE6060P1/03_Installation_instructions
Movable venting
Updated: Sat, 07 Jul 2018 04:48:17 GMT
Powered by
5
Advertisement
Table of Contents
