Removal Of Lid Lock; Components Within Cabinet; Removal Of Front Cabinet Brackets - Fisher & Paykel smartload DEGX1 Service Manual

6.5

Removal of Lid Lock

(a) Follow instructions for removal of the top deck. (Refer
to Section 6.4.2)
(b) Remove the screw securing the lid lock to the
underside of the top deck, move the front downwards
and slide out.
Reassembly
(a) Refit in reverse manner.
6.6

Components Within Cabinet

(a) Follow instructions for removal of the top deck. (Refer
to Section 6.4.2)
(b) Remove the two screws securing the top of the front
panel.
(c) Spread the top sides of the front panel to clear the
tabs on the door grabber assembly.
(d) Pull the cabinet front forward and lift the base clear of
the feet.
(e) Disconnect the cabinet front earth wire from the
chassis and lift the cabinet front clear.
Reassembly
(a) Refit in reverse manner.
6.7

Removal of Front Cabinet Brackets

(a) Follow general servicing instructions for components within the cabinet. (Refer to
Section 6.6)
(b) Invert the cabinet front.
(c) Remove the screw securing the bracket to the cabinet
front.
(d) Prise the retaining clip upwards.
(e) Slide the bracket inwards then to the rear to clear the
cabinet front.
Reassembly
(a) Refit in reverse manner.
- 43 -