Table of Contents
Advertisement
• Ensure packaging materials are kept out of reach of children.
• Please help protect the environment and dispose of the packaging from around the dryer in an
2. Tilt the dryer backwards and 'walk' it off the base one foot at a time. Not doing so may cause damage to your
floor and dryer.
3. Remove all packaging and accessories from inside the drum and ensure you remove protective covers from
the door and console.
Location
•
•
•
•
•
Venting
Correct installation is very important for all dryers to ensure maximum efficiency and safety.
Never run the dryer unless the airflow system is free from obstruction.
There must be adequate ventilation to avoid the back flow of gases into the room from appliances burning fuels,
including open fires, when operating the dryer.
Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other
fuels.
https://producthelp.fisherpaykel.com/au/Dry/Dryers/Vented/DE6060P1/User_Guide_DE6060P1/03_Installation_instructions
environmentally friendly manner.
The dryer must be installed in a well-ventilated, dust- free environment.
The dryer must not be installed on any textured floor coverings (eg carpet, rugs).
Do not install the dryer behind a lockable door, sliding door, or behind a door where the
hinge is on the opposite side to that of the dryer in such a way that the full opening of
the door is inhibited. Ensure the dryer door can always be opened fully.
Do not install the dryer outside, in a damp place, where there is a risk of freezing,
where it may be rained on, in direct sunlight or close to a source of heat.
Do not place your dryer on top of its power cable.
Updated: Sat, 07 Jul 2018 04:48:17 GMT
Powered by
2
Advertisement
Table of Contents
