How To Operate; Basic Operation; Using Quick Sync - Audio Technica ATW-T3201 User Manual

How to operate

Basic operation

1. Turn on the power button of the receiver (ATW-R3210).
• The display lights and the main screen is displayed.
2. Set the operating frequency.
3. Turn on the power switch of the transmitter (ATW-T3201/ATW-
T3202).
• The indicator lights and the display shows the main screen.
ATW-T3201
4. Set the transmission frequency.
5. Check the RF level indicator on the receiver.
• Check that antenna A or B lights up.
6. Speak into the microphone.
• Make sure the AF level indicator lights up on the receiver.
ATW-T3202
13

Using QUICK SYNC

You can easily send the frequency and the channel name of the
receiver with QUICK SYNC.
1. Press and hold (for approximately 2 seconds) the control dial on
the main screen.
2. Select [Sync] and press the control dial.
• Communication function is in standby.
Refer to "Using IR SYNC" (p. 25) for subsequent steps.