Sewing In Zips; Darning - Bernina Industrial 950 Instruction Manual

Sewing in zips
Zip foot 4 (007) / 14
Basic settings
Stitch width: 0
Stitch length 1
1/2 -
2
Needle position: right or
left accordingly
Preparation
Baste the zip seam, press open and then unpick. Baste
the closed zip so that the pressed edges remain together
and cover the zip teeth.
Sewing in the zip
Select the appropriate left or right needle position and
sew. To sew past the zip pull, leave the needle in the
fabric, raise the presser foot and push the zip pull behind
the foot. Lower the foot and continue sewing.
Darning
-. Sew a series of rows over
the hole.
Darning foot 9 (285)
Basic settings
Stitch width: 0
Stitch length: 0
Feed-dog: lowered (Darning)
Recommendation
Use a darning ring to tauten the fabric
evenly. Hold the ring lightly and move it
gently backwards and forwards.
Use darning or fine thread.
Adjust the upper thread tension so that
no knots are formed on either side of the
darn.
r-
/"
r-
r.
/"
(
IJ
(
')
(
IJ
(
IJ
(
)
"'"
.,,-,
'-' '-
Turn the ring by 1/4 and
sew over the previously
sewn rows.
r>
r r»
,.-.,
(
D
(
Ii
(
D
(
Il
(
IJ
"' "
'-" '--"...'=
"'-
Turn the ring by 1/4 and
cover again with rows but
not quite so densely.
Practical sewing
17
Note:
After darning is completed.
raise the feed-dog and
return the tension to its
normal position.