Power Supply Features; Safety Guidelines - Pace ADS200 Operation And Maintenance Manual

Power Supply Features



Feature
A Program button
B Power switch
C Up arrow button
D Down arrow button
E Power Receptacle
F Digital control LED
G Digital display
H Ground jack
I ISB connection
J Power inlet with fuse

Safety Guidelines

The following are safety precautions that personnel must understand and follow when using or servicing this
product.
1. POTENTIAL SHOCK HAZARD - Repair procedures on PACE products should be performed by
qualified service personnel. Line voltage parts may be exposed when the equipment is disassembled.
Service personnel must avoid contact with these parts when troubleshooting the product.
2. Tip-Heater Cartridges are hot when the handpiece is powered on and for a period of time after power
off. DO NOT touch the heater or the tip. Severe burns may result.
3. PACE Tip & Tool Stands are designed specifically for use with the associated handpiece and houses it
in a manner that protects the user from accidental burns. Always store the handpiece in its holder. Be
sure to place the handpiece in its holder after use and allow the Tip-Heater Cartridge to cool before
storing.
4. Always use PACE systems in a well-ventilated area. Fume extraction systems, such as those available
from PACE, are highly recommended to help protect personnel from solder flux fumes.
5. Exercise proper precautions when using chemicals (e.g., solder paste or flux). Refer to the Material
Safety Data Sheet (MSDS) supplied with each chemical and adhere to all safety precautions
recommended by the manufacturer.
©2018 PACE Inc., Vass, North Carolina, All Rights Reserved
'

Description
For access to program menu, presets, and confirmation of settings.
On/off control of power supply.
Increase set temperature and scroll through program menu functions.
Decrease set temperature and scroll through program menu functions.
Front panel connection of handpiece.
Indicates status of power supply.
Displays temperature setting and menu functions.
For ground system to static safe work area.
Connection for Instant SetBack tool stand.
Connection for IEC power cord and fuse replacement/storage.
&
,
/
:
Page 2