Safety Instructions - Furuno SC-33 Operator's Manual

SAFETY INSTRUCTIONS

WARNING
CAUTION
Warning, Caution
Safety instructions for the operator
WARNING
Do not open the equipment.
Only qualified personnel should work
inside the equipment.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
.
Warning Label
A warning label is attached to the equipment.
Do not remove the label. If the label is missing
or illegible, contact a FURUNO agent or dealer
about replacement.
WARNING
To avoid electrical shock, do not
remove cover. No user-serviceable
parts inside.
Name: Warning Label(1)
Type: 86-003-1011-3
Code No.: 100-236-233-10
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
Prohibitive Action
Safety instructions for the installer
ii
Mandatory Action
WARNING
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Be sure that the power supply is
compatible with the voltage rating of the
equipment.
Connecting an incompatible power supply
can cause fire or damage the equipment.
The voltage rating appears on the inlet
of power.
CAUTION
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass
SC-33 0.45 m
Do not use high-pressure cleaners to
clean this equipment.
This equipment has the waterproof rating
outlined in the specifications, at the back
of this manual. However, the use of
high-pressure cleaning equipment can
cause water ingress, resulting in damage
to, or failure of, the equipment.
.
Steering
compass
0.40 m