Furuno SC-33 Operator's Manual page 24

3. ADJUSTMENTS
Ship Size, ANT Position
Set the installation location, antenna position and ship size.
Menu Item
Ship's Width
Ship's Length
Ship's Height
ANT Position X0
ANT Position Y0
ANT Position Z0
CALC-SPD-POSN Y1 (Bow)
CALC-SPD-POSN Y2 (Stern)
CALC-SPD-POSN Z (Height)
Z
Ship's Height
(0.0)
Description
Set the ship's width.
Set the Ship's length.
Set the Ship's height.
Port-starboard location of antenna unit.
Enter a negative value for port-side, posi-
tive value for starboard-side.
The center of the vessel is [0 m].
Bow-stern location of the antenna unit.
Calculated from the center of the bow.
Height of antenna unit location, from the
bottom of the ship.
Ship's speed can be measured at two loca-
tions in addition to the antenna position.
Normally, enter the bow position (Y1) and
stern position (Y2).
Enter the height from the bottom to calcu-
late the ship's speed. To calculate the ship
speed at the draught line, enter the height
from the ship bottom to the draught.
Antenna Position Indication
Ship's Length
17
-
Ship's Length
Y
Ship's Width
Setting Range
1.0 m to 999.9 m
1.0 m to 999.9 m
1.0 m to 199.9 m
-327.64 m to
+327.64 m
0.0 m to 999.9 m
0.0 m to 199.9 m
0.0 m to 999.9 m
0.0 m to 999.9 m
0.0 m to 199.9 m
(0.0)
+
Y