Furuno SC-33 Operator's Manual page 34

APPENDIX 1 MENU TREE
For SC-33, the detailed setting of the sensor is available from
the TZTL12F/15F (V6.0 and after) via the NMEA network.
Also, when rebooting SC-33, re-connecting of menu is required to operate from
the TZTL12F/15F (V6.0 and after).
Refer to the OPERATOR'S MANUAL for each models.
MENU
[GNSS Setup]
Disable SV QZSS All
QZSS 1
QZSS 2
QZSS 3
GPS All
GPS 1
GPS 2
GPS 3
GLONASS All
GLONASS
GLONASS 2 Set range (0 to 24; 0)
GLONASS 3 Set range (0 to 24; 0)
Galileo All
Galileo 1
Galileo 2
Galileo 3
SV ELEV SV ELEV
QZSS ON/OFF
[Sensor]
1
Offset HDG
Pitch
Roll
Air Pressure
Air Temperature
DR Time DR Time
Ship Size,
1
ANT Position Ship's Width
Ship's Length
Ship's Height
ANT Position X0
ANT Position Y0
ANT Position Z0
CALC-SPD-POSN Y1
CALC-SPD-POSN Y2
CALC-SPD-POSN Z
(NO, YES)
Set range (0 to 197; 0)
Set range (0 to 197; 0)
Set range (0 to 197; 0)
(NO, YES)
Set range (0 to 32; 0)
Set range (0 to 32; 0)
Set range (0 to 32; 0)
(NO, YES)
Set range (0 to 24; 0)
(NO, YES)
Set range (0 to 36; 0)
Set range (0 to 36; 0)
Set range (0 to 36; 0)
Set range (5 to 90; 5)
Set range (-180.0 to 180; 0.0)
Set range (-10.0 to 10.0; 0.0)
Set range (-10.0 to 10.0; 0.0)
Set range (-99.9 to 99.9; 0.0)
Set range (-99.9 to 99.9; 0.0)
Set range (1 to 5; 5)
(Bow)
(Stern)
(Height)
AP-1
Bold Italic Default
0:Disable the ignore function.
1 to 197 (excludes 1 to 182; and 188 to 192)
0: Disable the ignore function.
1 to 197 (excludes 1 to 182; and 188 to 192)
0: Disable the ignore function.
1 to 197 (excludes 1 to 182; and 188 to 192)
GPS1 to 3 is set to "0" at the setting.
0: Disable the ignore function.
0: Disable the ignore function.
0: Disable the ignore function.
GLONASS1 to 3 is set to "0" at the setting.
0: Disable the ignore function.
0: Disable the ignore function.
0: Disable the ignore function.
GALILEO 01 to 3 is set to "0" at the setting.
0: Disable the ignore function.
0: Disable the ignore function.
0: Disable the ignore function.
1 Setting is required at installation.
For technician
Set range (1.0 to 999.9; 6.0)
Set range (1.0 to 999.9; 20.0)
Set range (1.0 to 199.9; 8.0)
Set range (-327.64 to 327.64; 0.00)
Set range (0.0 to 999.9; 10.0)
Set range (0.0 to 199.9; 6.0)
Set range (0.0 to 999.9; 0.0)
Set range (0.0 to 999.9; 20.0)
Set range (0.0 to 199.9; 0.0)