Table 12: Mac Match Criteria Frame Type Dependencies; Table 13: Default Service Ingress Policy Id 1 Definition - Alcatel-Lucent 7210 SAS E OS Quality Of Service Manual

Table 12: MAC Match Criteria Frame Type Dependencies

Frame Format
802dot3
802dot2-llc
802dot2-snap
ethernet-II
Service ingress QoS policy ID 1 is reserved for the default service ingress policy. The default
policy cannot be deleted or changed.
The default service ingress policy is implicitly applied to all SAPs which do not explicitly have
another service ingress policy assigned. The characteristics of the default policy are listed in
Table 13.

Table 13: Default Service Ingress Policy ID 1 Definition

Characteristic
Meters Meter 1
Meter 11
Flows Default Forwarding
Class (be)
7210 SAS-E OS Quality of Service Guide
Source MAC
Yes
Yes
Yes
Yes
Item
1 (one) meter all unicast traffic:
• Forward Class: best-effort (be)
• CIR = 0
• PIR = max (line rate)
• MBS, CBS = default (values derived from applicable policy)
1 (one) meter for all multipoint traffic:
• CIR = 0
• PIR = max (line rate)
• MBS, CBS = default (values derived from applicable policy)
1 (one) flow defined for all traffic:
• All traffic mapped to best-effort (be)
Dest MAC IEEE 802.1p Value
Yes
Yes
Yes
Yes
Definition
QoS Policies
Etype Value
Yes No
Yes No
Yes No
Yes Yes
Page 39