Sound Deadeners And Insulators; Floor Pan Sound Deadeners - Ford Escape 2010 Workshop Manual

SECTION 501-35: Body Repairs
DESCRIPTION AND OPERATION

Sound Deadeners and Insulators

WARNING: Always refer to Material Safety Data Sheet (MSDS) when handling chemicals and
wear protective equipment as directed. Examples may include but are not limited to respirators and
chemically resistant gloves. Failure to follow these instructions may result in serious personal injury.
NOTICE: Mastic is made of a combustible material and should be removed prior to carrying out
welding procedures to the area. Heat zones from welding near the mastic can cause the mastic
material to burn.
NOTICE: Corrosion protection must be restored to the area AFTER the mastic material is applied.
Corrosion protection products may be wax based and loss of adhesion may occur.
NOTE: To restore the vehicle to design intent, missing or damaged sound deadeners and insulators should
be installed with the correct service replacement component.
NOTE: The following illustrations serve as a reference to indicate mastic patch (butyl pad) locations.
Additional insulators and sound deadeners are used beyond those indicated in the illustration.
Item Part Number
1 201A10 LH/RH
2 201A12
3 27A98
4 840996
5 24692
6 24399 LH/ 24398 RH
7 28495 LH/ 28494 RH

Floor Pan Sound Deadeners

2010 Escape, Mariner, Escape Hybrid, Mariner Hybrid Workshop Manual
Description
Mastic insulator — door panel front
Mastic insulator — door panel rear
Mastic insulator — liftgate hinge to body
Mastic insulator — lower back panel
Mastic insulator — rear door opening
Mastic insulator — center body pillar lower
Mastic insulator — front body pillar lower
Procedure revision date: 07/27/2009