Invacare CS3 User Manual page 67

EFFECT
Actuator not working. Faulty hand control pendant.
Bed ends to not fit Bent brackets.
properly.
Part No 1153410
POSSIBLE CAUSE
Pendant cable is connected, power
is on, lock-out is off and hand
control pendant does not function.
Disconnect power supply then
replace hand pendant with
functioning unit (from another bed,
if available). Reconnect power and
test.
Visually ensure the brackets are
parallel to the frame.
VERIFICATION
Contact Invacare Continuing Care Service
Department 1-800-668-2337.
Carefully straighten minor deformations. Call Service
Department to replace significantly bent brackets,
1-800-668-2337.
67
10 TROUBLESHOOTING
CORRECTIVE ACTION
Invacare ®CS Series Beds