Remington BS1812A Owner's Manual page 13

TRIMMER/EDGER OPERATION
Figure 27 - Replacing spool into spool
housing
Figure 28 - Replacing spool cover onto
spool housing
USING EDGER
1. Make sure trimmer/edger line is advanced
to full cutting length.
2. Roll the trimmer/edger using the edging
wheel attached to the cutting guard (see
Figure 29).
3. Start the trimmer/edger and trim along
edging lines. Be sure to keep the cutting
lines vertical.
13
Figure 29 - Edging
www.desatech.com