Preparation
Make sure you have:
❑
A dedicated, grounded power outlet that is protected by a circuit breaker within
6 feet of the FrameSaver SLV unit
❑
A clean, well-lit, and ventilated site that is free from environmental extremes
❑
One-to-two feet of clearance for cable connections
❑
A physical connection to the frame relay DDS network
❑
An asynchronous terminal or PC (personal computer).
❑
Configuration information for the FrameSaver unit being installed or replaced.
❑
Appropriate cables:
— Data port cable
— COM port-to-terminal or COM port-to-PC cable
— An RJ11 modem cable
See the appropriate manual for additional information.
For troubleshooting, see the FrameSaver SLV Operations Guide
For technical specifications, and connectors, cables, and pin assignments, see the
FrameSaver SLV Technical Description
Cables You May Need to Order
If connecting to a . . .
LAN
Contact your sales representative to order cables.
Safety Instructions
Please refer to the
Order a . . .
Customer converter with a DB25 plug on
one end and an 8-pin modular jack on
the other end, with a custom 8-conductor
cable and LAN adapter
Important Safety Instructions
on page 29.
3
Model/Feature
Number
3100-F2-910