Setting Up The Isdn Dbm - Paradyne FrameSaver SLV 9626 Installation Manual

Setting Up the ISDN DBM

These instructions are for units with ISDN backup capability. The ISDN BRI DBM
supports up to 2 B-channels.
The following guidelines apply:
Central site configuration guidelines:
— Set up the ISDN DBM physical interface.
— Change the Automatic Backup Configuration to Multi_Site_Backup. (A BRI
DBM is configured for Single_Site_Backup.)
— Modify the Link Profile(s) that Automatic Backup Configuration created to add a
phone number.
Remote site configuration guidelines:
— Set up the ISDN DBM physical interface.
— Modify the HQ_Site Link Profile that Automatic Backup Configuration created
to add a phone number.
— Set the criteria by which automatic backup will take place.
Setting Up the DBM Physical Interface
Procedure
1. Configure the DBM interface.
Main Menu
2. Minimally, set the following configuration options:
— Interface Status set to Enable.
— Service Profile ID1 (SPID)
— Local Phone Number 1
— Service Profile ID2 (SPID)
— Local Phone Number 2
3. Save the configuration and return to the ISDN menu.
Configuration ISDN Physical
18