Minimal Installation For Service Providers - Paradyne FrameSaver SLV 9626 Installation Manual

Minimal Installation for Service Providers

In this set of procedures, once the unit is installed and minimal configuration is
completed using the Easy Install feature, the NOC can complete and verify the setup.
Physically Installing the Unit and Setting Up for Remote Access
It is assumed that frame relay service is turned on at the site.
Procedure
1. Follow Steps 1 through 7 of
2. Install the DTE cable (see
3. Install the modem cable (see
4. If the unit has ISDN backup capability, install the ISDN DBM cable (see
to ISDN on page 26).
Physical installation of the unit is complete; the NOC can now remotely access the unit
for additional configuration.
Full Installation and Setup
Connecting to the DTE (Router or FRAD)
Connecting the Modem
13
on page 10.
on page 24).
on page 25).
Connecting