Lexus GS450h 2008 Quick Manual page 47

Topic 5
Driving Comfort
■
Programming HomeLink
■
Programming other devices
For U.S.A. owners:
To program an entry gate, see the Owner' s Manual.
To program other devices, contact your Lexus dealer.
For Canadian owners:
To program all devices, follow the same procedure as for garage door programming.
47
®
Hold your hand-held transmitter within 3
inches of the HomeLink
Press and hold down the desired HomeLink
button.
For U.S.A. owners:
While pressing the HomeLink
press and hold down the button on the
hand-held transmitter until the indicator
light changes from a slow to a rapid flash.
For Canadian owners:
While pressing the HomeLink
repeatedly press and release (cycle) the
button on the hand-held transmitter every
2 seconds until the indicator light changes
from a slow to a rapid flash.
If your garage door is of the rolling code type:
Press the training button on the motor-head
unit in your garage.
Press and release the vehicle' s programmed
HomeLink
may open.
If the door does not open, press and
release the same button once again.
® buttons.
® button twice. The garage door
®
® button,
® button,