Table of Contents
Advertisement
3.3.1 WAN Interface
PPPoE Detailed Configuration
Generally, the following configurations are not required.
1.
If necessary, assign each parameter referring to the descriptions below.
Parameter & Description
Server Name
Specifies the server name used for PPPoE
connection.
Service Name
Specifies the service name that is applied to a
PPPoE connection.
MTU
Specifies the maximum size of IP packet to be
sent.
DNS Server Address
Specifies the method of IP address setting for a
DNS server.
Authentication Type
Specifies the authentication method.
PPP Keep Alive
Specifies whether the PPP Keep Alive feature is
used or not.
*1
When selecting "Manual Config", specify the IP addresses of both Primary DNS Server and Secondary DNS Server.
2.
Click Set.
The Select Connection screen is displayed.
3.
Click OK (Reboot) to reboot the card.
30
Installation Manual
Default
No default
Max. 23 alphanumeric
characters
No default
Max. 31 alphanumeric
characters
1454
576–1492
Auto Config
Auto Config, Manual Config
AUTO
AUTO, Not Used, CHAP, PAP
Enable
Enable, Disable
Value Range
*1
Document Version 2008-10
Advertisement
Table of Contents
