Table of Contents
Advertisement
PPPoE Configuration
If you select PPPoE in Select Connection and click the corresponding Set button, the following screen is
displayed.
PPPoE Basic Configuration
1.
Assign each parameter, based on the information provided by the ISP, referring to the descriptions below.
Parameter & Description
ISP name
Specifies the ISP name (optional).
User name
Specifies the user name provided by the ISP
(compulsory).
Password
Specifies the password provided by the ISP
(compulsory).
Fixed IP Address
Specifies the IP address provided by the ISP
(required only when using a fixed IP address for
PPPoE connection).
Subnet mask
Specifies the subnet mask address for the fixed
IP address (required only when using a fixed IP
address for PPPoE connection).
*1
If not using a fixed IP address for PPPoE connection, do not change the default value.
*2
If obtaining an IP address automatically, do not change the default IP address.
Document Version 2008-10
*1
Default
Provider1
Max. 15 alphanumeric
characters
No default
Max. 63 alphanumeric
characters
No default
Max. 31 alphanumeric
characters (case-sensitive)
0.0.0.0
Available IP addresses
*2
No default
28–32
3.3.1 WAN Interface
Value Range
Installation Manual
29
Advertisement
Table of Contents
