Daikin FH15CBV1L Technical Manual page 56

FLN-D
Installation Diagram
Air Discharge Louver
Signal Receiver Indicator Lights
Air Discharge Grille
Air Intake Grille
(Inside Air Intake Grille)
Installation Of The Indoor Unit
Preliminary Site Survey
• Electrical supply and installation shall conform
to the local authority (e.g. National Electrical
Board).
• Voltage supply fluctuation must not exceed
±10% of the rated voltage. Electricity supply
lines must be independent of welding
transformers which can cause high supply
fluctuation.
• Ensure that the installation location is
convenient for wiring and piping.
Figure A
A
H
G
F E
Air Intake
Air Filters
Air Intake
Air Discharge
Standard Mounting
Ensure that the overhead supports are strong
enough to hold the weight of the unit. Position
the hanger rods (wall mounting bracket for floor
standing), and check for its alignment with the
unit as shown in Figure A. Also, check that the
hangers are secured and the base of the fan coil
unit is leveled in both horizontal directions,
taking into account the gradient for drainage
flow as recommended in Figure B.
Model
FLN40DV1L
FLN40DV1M
J
FLN50DV1L
FLN50DV1M
Wrap the insulated pipe with
finishing tape from bottom to top
Dimensions
A B C D E F
1714 666 273 130 1636 39
1714 666 273 130 1636 39
All dimensions are in mm/(in)
G H I J K
- - - - -
- - - - -
54