Related Manuals for WAGNER PEA-C4XL-S
Summary of Contents for WAGNER PEA-C4XL-S
- Page 1 Translation of the Original Operating Manual PEA-C4XL-S Automatic Powder Spray Gun Version 03 / 2014 P_02330 II 2 D EEx 2mJ 85 °C 0102...
-
Page 3: Table Of Contents
4.1.1 Electrical Devices and Equipment 4.1.2 Staff Qualifi cations 4.1.3 Safe Work Environment Safety Instructions for Staff 4.2.1 Safe Handling of WAGNER Powder Spray Devices 4.2.2 Grounding the Device 4.2.3 Accessories and Spare Parts 4.2.4 Cleaning and Maintenance 4.2.5 Handling Powder Lacquers... - Page 4 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL Table of Contents Grounding 6.7.1 Grounding the Powder Coating System OPERATION Training the Operating Staff Safety Instructions Switching on the Spray Gun Switching Off the Spray Gun Switching Off the Spray Gun in the Event of Faults or Emergencies...
- Page 5 ORDER NUMBER DOC2345334 OPERATING MANUAL Table of Contents SPARE PARTS 13.1 How Can Spare Parts Be Ordered? 13.2 PEA-C4XL-S Corona Automatic Gun 13.3 C4 R Electrode Holder with Nozzles 13.4 WA90 C4 Angle Adapter 13.5 WA60 C4 Angle Adapter 13.6...
-
Page 6: General Information
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL GENERAL INFORMATION PREFACE The operating manual contains information about safely operating, maintaining, cleaning and repairing the device. The operating manual is part of the device and must be available to operating and service staff . -
Page 7: Languages
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL LANGUAGES The operating manual is available in the following languages: Language: Order No. Language: Order No. German 2345333 English 2345334 Italian 2345335 ABBREVIATIONS Number of pieces Position Marking in the spare parts lists Order No. -
Page 8: Correct Use
Automatic spray gun for automatic coating TYPE OF USE The PEA-C4XL-S spray gun serves as stationary equipment for industrial electrostatic coating with fl ammable powder in automatic systems. It can be operated either with single control units or switch cabinet modules. -
Page 9: Processible Working Materials
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL PROCESSIBLE WORKING MATERIALS Types of powder which can be charged electrostatically Metallic powder REASONABLY FORESEEABLE MISUSE The following is prohibited: coating work pieces which are not grounded, unauthorized conversions and modifi cations to the spray gun,... -
Page 10: Identification
Incorrect use of the spray gun! Risk of injury and damage to the device. Only connect original Wagner devices to the PEA-C4XL-S HiCoat spray gun. The PEA-C4XL-S powder spray gun may only be connected to the control devices listed below: EPG-S2 EPG-Sprint X... -
Page 11: Safety Feature Identification
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL SAFETY FEATURE IDENTIFICATION Plates bearing information for the user have been attached to the work openings of the powder coating booth. The plate size corresponds to the standard category Ø 100 mm; 3.94 inches. -
Page 12: General Safety Instructions
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL GENERAL SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS FOR THE OPERATOR Keep this operating manual at hand near the device at all times. Always follow local regulations concerning occupational safety and accident prevention. 4.1.1 ELECTRICAL DEVICES AND EQUIPMENT To be provided in accordance with the local safety requirements with regard to the operating mode and ambient infl uences. -
Page 13: Safety Instructions For Staff
4.2.1 SAFE HANDLING OF WAGNER POWDER SPRAY DEVICES Do not point spray guns at people. Before all work on the device, in the event of work interruptions and functional faults: - Switch off the energy/compressed air supply. -
Page 14: Cleaning And Maintenance
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 4.2.4 CLEANING AND MAINTENANCE Before starting cleaning or any other manual work, the high-voltage in the spray area must be shut down and locked to prevent it from being switched back on. -
Page 15: Note On Safe Discharges
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL NOTE ON SAFE DISCHARGES Nozzle Electrode Luminous discharge Work piece P_01091 With the high-voltage switched on, a luminous or corona discharge occurs at the electrode tip; this can only be seen in the dark. This physical eff ect can be seen when the electrode is brought near the grounded work piece. -
Page 16: Protective And Monitoring Equipment
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL PROTECTIVE AND MONITORING EQUIPMENT WARNING Incorrect use! Risk of injury and damage to the device. Protective and monitoring equipment must not be removed, modifi ed or rendered unusable. Regularly check for perfect functioning. -
Page 17: Description
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL DESCRIPTION SPRAY GUN DESIGN P_02331 Designation Fan spray nozzle or round spray nozzle Defl ector cone for round spray nozzle Round spray nozzle electrode Union nut Interlocking Spray gun body Powder hose connection... -
Page 18: Technical Data
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL TECHNICAL DATA Dimensions: Length/width/height see Chapter 5.3.1 Weight Electrical: Input voltage maximum 22 Vpp Input current maximum 0.9 A Frequency 19 - 30 kHz Output voltage maximum 100 kV DC Polarity negative... -
Page 19: Dimensions
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 5.3.1 DIMENSIONS P_02332 Measurement inch 1.18 15.75 1,100 43.31 2.36 2.83 Measurement for installation dimension C calculation when utilizing a round spray nozzle with defl ector cone... -
Page 20: Permitted Accessories
ORDER NUMBER DOC2345334 OPERATING MANUAL PERMITTED ACCESSORIES Only the accessories listed in this operating manual may be connected to the PEA-C4XL-S powder spray gun. The accessories listed in Chapter 12 were included in the EC type examination and are approved for use with the gun. -
Page 21: Assembly And Commissioning
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL ASSEMBLY AND COMMISSIONING TRAINING ASSEMBLY/COMMISSIONING STAFF WARNING Incorrect installation/operation! Risk of injury and damage to the device. The commissioning staff must have the technical skills to safely undertake commissioning. The commissioning staff must be familiar with the provisions of European standard DIN EN 50177. -
Page 22: Preparing The Spray Gun
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL PREPARING THE SPRAY GUN 6.4.1 SELECTION OF THE SUITABLE NOZZLE SYSTEM The process of changing from the fan spray nozzle to a round spray nozzle with a defl ector cone is described in Chapter 8.5 "Fitting a Round Spray Nozzle". - Page 23 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL Nozzle Application Distance to Powder work piece discharge (mm) (g/min) HPO-1¹ Wide fl at spray nozzle for high powder application (slow > 200 powder cloud) good atomization (Total air > 4.5 Nm³/h)
- Page 24 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL...
-
Page 25: Handling Of The Hose Coupling
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL HANDLING OF THE HOSE COUPLING Loosening the hose coupling: 1. Lift the O-ring 1 out of the groove and slide it towards spray gun. 2. Turning the locking nut 2 in a clockwise direction up to the stop and pull the hose coupling 3 out of the coupling piece 4. -
Page 26: Assembling The Spray Gun
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL ASSEMBLING THE SPRAY GUN WARNING Unintentional putting into operation! Risk of injury. Before any work on the device, in the event of work interruptions and malfunctions: Switch off the energy/compressed air supply. - Page 27 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL Procedure: 1. Switch off the high-voltage generation on the control unit. 2. Press locking button 1 and move supporting tube 2 away backwards. 3. Connect electrical cable 3 to connection I on the spray gun and to the control unit.
-
Page 28: Grounding
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL GROUNDING WARNING Heavy paint mist if grounding is insuffi cient! Danger of poisoning. Insuffi cient paint application quality. Ground all device components. Ground the work pieces to be coated. For safety reasons, the spray gun and the work piece must be properly grounded. For the spray gun, this is done via the grounding connection. -
Page 29: Grounding The Powder Coating System
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 6.7.1 GROUNDING THE POWDER COATING SYSTEM P_02338 Only use mains cables with grounding strand! Connect grounding cable with signal ground! Remove all paint from hooks and other hanger parts! Do not wear non-conducting gloves! -
Page 30: Operation
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL OPERATION TRAINING THE OPERATING STAFF WARNING Incorrect operation! Risk of injury and damage to the device. The operating staff must be qualifi ed to operate the entire system. Before work commences, the operating staff must receive appropriate system training. -
Page 31: Switching On The Spray Gun
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL SWITCHING ON THE SPRAY GUN The spray gun is switched on via the superordinated control unit of the system. At the same time, the high-voltage and the powder feed are activated. SWITCHING OFF THE SPRAY GUN The gun is switched off diff erently depending on the type of powder injector. -
Page 32: Optimizing The Powder Cloud For Your Coating
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL OPTIMIZING THE POWDER CLOUD FOR YOUR COATING Procedure: 1. Switch on the high-voltage generation and the powder feed. Note: To minimize the wear on the wearing parts, the total feed air and dosing air should be under 5 Nm³/h! -
Page 33: Performing A Paint Change
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL PERFORMING A PAINT CHANGE WARNING Dust formation! Danger of poisoning. Danger due to escaping dust, contamination of the device and device components. Before starting cleaning or other manual work, the high-voltage must be shut down and locked to prevent it from being switched... -
Page 34: Impulse Flushing
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 7.7.1 IMPULSE FLUSHING WARNING Powder supply hose coupling may be hurled around! Risk of injury and damage to the device. Check whether the hose is correctly attached to the hose coupling. Completely lock the hose coupling and secure it with an O-ring. -
Page 35: Reproducible Setting Of The Nozzle Position
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL REPRODUCIBLE SETTING OF THE NOZZLE POSITION 30° For a horizontal powder cloud, the fl at spray nozzle is set where the protective wedge is in the 0° position. 15° When attaching a round spray nozzle, we recommend turning the protective wedge to the 90°... -
Page 36: Cleaning And Maintenance
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL CLEANING AND MAINTENANCE CLEANING 8.1.1 CLEANING STAFF Cleaning work should be undertaken regularly and carefully by qualifi ed and trained staff . The staff must be familiar with the DIN EN 50177 provisions. They should be informed of specifi c hazards during their training. -
Page 37: Cleaning Procedures
The cleaning intervals should be adapted by the operator depending on the level of use and if necessary the level of soiling. If in doubt, we recommend contacting J. Wagner AG's specialist personnel. The valid health and safety specifi cations and the safety instructions provided in Chapter 4... -
Page 38: Maintenance
Incorrect maintenance/repair! Risk of injury and damage to the device. Have repairs and part replacements carried out only by specially trained staff or a WAGNER service center. Before all work on the device and in the event of work interruptions: - Switch off the energy/compressed air supply. -
Page 39: Maintenance Procedures
The maintenance intervals should be adapted by the operator depending on the level of use and if necessary the level of soiling. If in doubt, we recommend contacting J. Wagner AG's specialist personnel. The valid health and safety specifi cations and safety instructions provided in Chapter 4... -
Page 40: Replacing The Spray Gun
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 8.2.4 REPLACING THE SPRAY GUN WARNING Unintentional putting into operation! Risk of injury. Before any work on the device, in the event of work interruptions and malfunctions: Switch off the energy/compressed air supply. - Page 41 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL Before replacing the spray gun, any powder residue must be thoroughly removed. The wearing parts in the spray gun, marked in the spare parts list with " ", must be regularly checked and, if necessary replaced.
-
Page 42: Cleaning The Gun And Dismantling The Flat Spray Nozzle
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL CLEANING THE GUN AND DISMANTLING THE FLAT SPRAY NOZZLE Procedure: 1. Unscrew union nut 1 from gun housing 5. 2. Pull fl at spray nozzle 2 off electrode holder 3. 3. Carefully remove electrode holder 3 from gun housing 5. -
Page 43: Replacing The Protective Wedge
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL REPLACING THE PROTECTIVE WEDGE Note: A wedge tool is available to prevent the protective wedge from being damaged when dismantling and inserting. You will fi nd the necessary wearing parts and spare parts in Chapter 13 "Spare Parts" of this operating manual. - Page 44 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL Note: The same wedge tool is used to insert the protective wedge. 1 Wedge tool 2 Protective wedge (when positioned) 3 Electrode holder (shown with a cut- away view to improve comprehension)
-
Page 45: Fitting The Round Spray Nozzle
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 5. After long periods of operation or having replaced the protective wedge repeatedly, it is also recommended to check the powder tube for wear and replace if necessary. You will fi nd the necessary wearing parts and spare parts in Chapter 13 "Spare Parts"... - Page 46 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL CAUTION Electrode tip! Risk of injury. Take care when fi tting the C4 R electrode holder. Carefully fi t the new C4 R electrode holder 6 into spray gun housing 5. Slide defl ector cone sleeve 7 onto electrode holder 6.
-
Page 47: Assembling The Angle Adapter
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL ASSEMBLING THE ANGLE ADAPTER 8.6.1 REMOVING THE NOZZLE AND ELECTRODE HOLDER The standard Corona spray gun is delivered with a fl at spray nozzle. The nozzle can be changed easily, as described below. -
Page 48: Fitting The Angle Adapter
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 8.6.2 FITTING THE ANGLE ADAPTER Procedure: 1. Install electrode holder 1 together with nozzle 2 in nozzle insert 3 and tighten union nut 4. 2. Push angle adapter 5 onto the gun body and gently screw threaded sleeve 6. - Page 49 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL Unscrew threaded sleeve 8 and locking sleeve 9 with mounting tool 10. Pull connecting element 11 out of elbow fi tting 12. Insert screwdriver into recess X and turn it until the nozzle insert 7 loosens.
-
Page 50: Assembling The Corona-Star
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL ASSEMBLING THE CORONA-STAR The Corona-Star is a retrofi t set for the spray gun, which helps to achieve a better surface quality (reduction of "orange peel"). WARNING Danger from electric current! Risk of injury and damage to the device. -
Page 51: Corona-Star For Angle Adapter
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL CORONA-STAR FOR ANGLE ADAPTER 8.8.1 ASSEMBLING THE CORONA-STAR WARNING Danger from electric current! Risk of injury and damage to the device. Only trained personnel may modify the Corona-Star. Prior to assembling the Corona-Star, the high-voltage and the powder feed must be switched off and secured against being inadvertently switched on. -
Page 52: Inspections In Accordance With Din En 50177: 2010-04
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL INSPECTIONS IN ACCORDANCE WITH DIN EN 50177: 2010-04 If the system is used for electrostatic coating with fl ammable coating powders, testing should be undertaken in accordance with DIN EN 50177: 2010-04 as per Table 3 and Table 4. -
Page 53: Overview Of Inspections
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL OVERVIEW OF INSPECTIONS... - Page 54 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL...
- Page 55 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL...
-
Page 56: Disassembly And Disposal
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL DISASSEMBLY AND DISPOSAL 10.1 DISASSEMBLY WARNING Incorrect disassembly! Risk of injury and damage to the device. Before starting disassembly: - Switch off the energy/compressed air supply. - Ensure that all system components are grounded. -
Page 57: Disposal
Wagner or one of our dealers will take back your used Wagner waste electrical or electronic equipment and will dispose of it for you in an environmentally friendly way. -
Page 58: Troubleshooting And Rectification
Danger to life and damage to the device. Wagner devices, protective systems and safety, monitoring and control equipment may only be maintained/repaired as defi ned in Directive 94/9/EC (ATEX) by trained Wagner service personnel or capable persons in accordance with TRBS 1203! Note national regulations! - Page 59 OPERATING MANUAL Fault Cause Remedy No electrostatics (e.g. no wrap Fault in the high-voltage Contact a Wagner service center around or powder adhesion) generator Electrical cable from spray gun Replace the electric cable to control unit faulty Cascade in spray gun faulty...
-
Page 60: Accessories
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL ACCESSORIES 12.1 FLAT SPRAY NOZZLES Order No. Designation 390324 Flat spray nozzle F1 P_00694 390325 Flat spray nozzle F2 P_00694 390326 Fan spray nozzle F3 P_00694 2311889 Flat spray nozzle F4 P_00694... -
Page 61: Corona-Star Retrofit Set
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 12.3 CORONA-STAR RETROFIT SET P_01104 Order No. Designation 390918 Corona-Star, complete 260296 Corona-Star electrode 390319 Union nut Wearing parts 12.4 CORONA-STAR WA C4 P_01168 Order No. Designation 2306335 Corona-Star WA C4... -
Page 62: Wedge Tool
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 12.5 WEDGE TOOL P_00714 Order No. Designation 390900 Wedge tool including 20 protective wedges Only available as a set 12.6 ELECTRIC CABLES AND HOSES Order No. Designation Application 351216 Electrical cable 5 m... -
Page 63: Angle Adapter
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 12.7 ANGLE ADAPTER Order No. Designation 390927 Angle adapter WA30 C4 390930 Angle adapter WA60 C4 390931 Angle adapter WA 90 C4 P_01626 Order No. Designation 390939 Mounting tool WA C4 P_01621... -
Page 64: Powder Measuring Bag
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 12.8 POWDER MEASURING BAG DANGER Risk of explosion due to electrostatic charging! Danger to life and damage to the device. Only use powder measuring bag when high-voltage is switched off ! For measuring powder quantities for the C4 gun generation Order No. -
Page 65: Spare Parts
Incorrect maintenance/repair! Risk of injury and damage to the device. Have repairs and part replacements carried out only by specially trained staff or a WAGNER service center. Before all work on the device and in the event of work interruptions: - Switch off the energy/compressed air supply. -
Page 66: Pea-C4Xl-S Corona Automatic Gun
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 13.2 PEA-C4XL-S CORONA AUTOMATIC GUN P_02336 PEA-C4XL-S automatic gun Order No. Designation 2344249 PEA-C4XL-S Corona automatic gun 390311 Union nut 390324 Flat spray nozzle F1 390915 Electrode holder 390310 Wedge 390911 Powder tube, C4 ET... -
Page 67: C4 R Electrode Holder With Nozzles
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 13.3 C4 R ELECTRODE HOLDER WITH NOZZLES P_01103 C4 R electrode holder with nozzles Order No. Designation 390917 C4 R electrode holder, complete 390916 C4 R electrode holder 390310 Wedge 390313 Defl ector cone sleeve 390207 R20 defl ector cone ( 20 mm;... -
Page 68: Wa90 C4 Angle Adapter
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 13.4 WA90 C4 ANGLE ADAPTER P_01623 WA90 C4 angle adapter Order No. Designation 390931 WA90 C4 angle adapter 390947 WA C4 ET union nut 390933 WA90 C4 ET nozzle insert 390942 WA90 C4 ET elbow fi tting... -
Page 69: Wa60 C4 Angle Adapter
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 13.5 WA60 C4 ANGLE ADAPTER P_01624 WA60 C4 angle adapter Order No. Designation 390930 WA60 C4 angle adapter 390947 WA C4 ET union nut 390934 WA60 C4 ET nozzle insert 390943 WA60 C4 ET elbow fi tting... -
Page 70: Wa30 C4 Angle Adapter
PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL 13.6 WA30 C4 ANGLE ADAPTER P_01625 WA60 C4 angle adapter Order No. Designation 390927 WA30 C4 angle adapter 390947 WA C4 ET union nut 390935 WA30 C4 ET nozzle insert 390944 WA30 C4 ET elbow fi tting... -
Page 71: Declaration Of Warranty And Conformity
The manufacturer will not be held liable or will only be held partially liable if third-party accessories or spare parts have been used. With genuine WAGNER accessories and spare parts, you have the guarantee that all safety regulations are complied with. -
Page 72: Declaration Of Conformity
0102 CE Certifi cate of Conformity The CE certifi cate of conformity is enclosed with this product. If needed, further copies can be ordered through your WAGNER dealer by specifying the product name and serial number. Order number: PEA-C4XL-S automatic gun 2347535... - Page 73 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL...
- Page 74 PEA-C4XL-S VERSION 03/2014 ORDER NUMBER DOC2345334 OPERATING MANUAL...
- Page 76 Order No. 2345334 Edition 03/2014 Germany Phone E-mail Switzerland Phone More contact addresses on the Internet at: Company/Locations/WAGNER worldwide Subject to changes without notice...