Dealing With Problems; Shutting Down - Panasonic Toughbook CF-07 Series Reference Manual

Dealing with Problems (Advanced)
When a problem occurs, power off the wireless display, then connect the optional port replicator (CF-VEB071), external
keyboard and external display, and then refer to this page. If you still cannot troubleshoot the problem, contact Panasonic
Technical Support.
Starting Up
The power indicator or
battery indicator is not lit
[Enter Password] is displayed
POST Startup Error(s) is
displayed
Windows startup, or an
operation is extremely
slow
The date and time are in-
correct
When the previous item
is not the cause
The cursor cannot be
controlled
The password is not re-
quired when resuming
from the standby or hi-
bernation mode
The DISPLAY READY in-
dicator does not go on
even when the HDD indi-
cator goes off

Shutting Down

Unable to shut down Win-
dows
Check the cable connection for the AC adaptor.
Check to see if a fully charged battery is properly installed.
Remove the battery pack and disconnect the AC adaptor, then connect them again.
Input your password. If you have forgotten it, contact Panasonic Technical Support.
page 37
Press F9 in the Setup Utility (
settings to their default values (except the password settings). Then, the Setup Utility
must be run once again for you to input the appropriate operating environment set-
tings. (The processing speed depends on the application software used, so this
operation may not cause the processing speed to increase.)
You can set the date and time through [Date/Time] in [Start] - [Settings] - [Control
Panel].
When the computer is connected to a Local Area Network (LAN), confirm the date
and time of the server.
If you continue to experience problems, the internal battery maintaining the clock
may need to be replaced. Contact Panasonic Technical Support.
This computer will not correctly recognize the date and time starting from the year
2100 A.D.
Press F9 in the Setup Utility (
settings to their default values (except the password settings).
Try removing all peripheral devices.
Windows 98
Run SCANDISK to check the hard disk.
At start-up, press Ctrl
Windows 2000
Click [Local Disk(C:)] in [My Computer] with the right button, select [Properties],
then select [Tools] - [Check Now].
At start-up, press F8
Restart the computer by using the keyboard (e.g.,
When the port replicator is not connected, turn off the computer.
Use the Windows password as the following.
Select [Start] - [Settings] - [Control Panel] - [Power Management]* - [Advanced],
then the check mark for [Prompt for password when computer goes off standby].
* Windows 2000 : [Power Options]
Press the MENU button of the wireless display, then set the password (
ing Instructions of the wireless display).
A problem possibly occurred during startup.
After powering off the computer, connect the port replicator and restart the computer.
Do not shut down Windows during music playback.
page 29). This will restore the Setup Utility's
page 29). This will restore the Setup Utility's
to operate the computer in the Safe mode.
to operate the computer in the Safe mode.
).
Operat-
39