Assembly - Reebok 1000 ZX RBEL9906.0 User Manual

A
SSEMBLY
To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own phillips screwdriver
mallet .
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. If a part is not in the parts bag, check to see if it has been preassembled.
M6 Split Washer M8 Split
(102)–8
Washer (101)–4
M4 x 16mm
Wave Washer Screw (116)–16
(100)–2
M8 x 15mm Button
Screw (106)–10
1. While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 93mm Button Screws
(82) and two M10 Curved Washers (99).
M8.5 x 16mm x
1.5mm Washer
(103)–6
M6 x 35mm
Screw (109)–4
M8 x 20mm Button
Screw (107)–4
M10 x 93mm Button Screw (82)–4
M10 x 25mm M10 Curved
Washer (87)–2
Washer (99)–4
M8 x 25mm Button
Screw (110)–2
1
82
99
99
4
5
and rubber
Link Arm
Spacer (74)–4
M6 x 62mm
Screw (108)–4
M10 x 20mm Button
Screw (111)–2
1