Gravely 996122 Owner's/Operator's Manual page 18

Glove Box Enclosure
Refer to Figure 11:
Unlock glove box by inserting key and rotating clockwise 90
degrees to the position shown. Rotate twist lock clockwise
another 90 degrees to open. To close, push glove box lid
shut. To lock while shut, rotate key 90 degrees
counterclockwise and remove. Key can be removed in
locked and unlocked positions.
Cargo Box / Flat Bed Set-Up
CAUTION: Always load front of cargo box first
and back last. Never load back with more
weight than the front.
DANGER: Make sure area behind cargo box is
clear of personnel before raising the cargo box.
Bodily harm can result from being pinched
between cargo box and another object or from
a load dumping and/or rolling onto a bystander.
The cargo box is factory standard with removable tailgate
and side panels for changing cargo box into a flatbed.
Refer to Figure 12:
1. Remove cotter pins (#6) and flat washers (#5) from
tailgate cable pins (#8). (2-places)
2. Remove 1/4"-20 hex screws (#4) and tailgate pivots
(#1) from tailgate. (2-places)
3. Pull gate release lever (#7) back on both sides and
remove gate (#3) from cargo box.
4. Replace flat washers (#5) and cotter pins (#6) in
tailgate cable pins (#8) for storage.
Keyed Twist Lock
(Shown Unlocked)
Figure 11
24698
Refer to Figure 13:
23534
5. Remove 5 5/16"-18 hex flange screws (#10) and right
hand side panel (#9) as shown.
6. Repeat step 5 for left hand side panel.
GB-18
Figure 12
Figure 13
24699