Advertisement
5a
Operating in Access Point Mode
6.) Choose a name for your AP/Bridge. You
will use this name to identify and connect to the
network. Optionally, you may change your
login username and password to the web-user
interface at the IP address you selected previ-
ously. Click 'Next'.
5b
Operating in Bridge Mode (Client Mode)
1.) In Bridge Mode, you must scan for the
wireless network that you would like to "bridge"
to your wired network device. Select the net-
work and click 'Next'.
6
Connecting to your AP/Bridge
1.) To connect to your new wireless network,
click the wireless network icon in your system
tray. It is located in the bottom right-hand
corner of your desktop.
Technical Support: 1.888.202.3344 or techsupport@hawkingtech.com
7.) In Access Point Mode, it is optional to setup
an encrypted network. If you don't, your new
wireless network will be open to any and all
users who can see your network. Hawking
suggests setting up a basic WPA security as
shown above.
2.) Here you are given the option to change
the password for log-in to the web-user inter-
face. If you wish to leave the log-in information
as the default settings (Username: admin,
Password:1234) click 'NEXT' to move on.
2.) Click the 'View Wireless
Networks' button in the 'Wire-
less Network Connection
Status' window.
www.hawkingtech.com
8.) The Setup Summary displays all your
recently configured settings for the HWABN1
AP/Bridge. Please double check all settings to
make sure they are correct and remember the
IP address for logging into the web-user inter-
face. Click 'SET' to apply all settings.
3.) The Setup Summary displays all your
recently configured settings for the HWABN1
AP/Bridge. Please double check all settings to
make sure they are correct and remember the
IP address for logging into the web-user inter-
face. Click 'SET' to apply all settings.
3.) Find your new network (default ID:
Hawking_300N_AP/Bridge) and click on
it twice or select and click 'Connect'. You
can now enjoy your newly extended
wireless network!
NOTE: If you have WPA Security
enabled you will be prompted to
enter your password.
© 2008 Hawking Technologies, Inc. All rights reserved. All trademarks herein are the property of
their respective owners. Apple and Mac are registered trademarks of Apple Computer, Inc. No
Advertisement
