Mode - Daikin BRC7E61W Operation Manuals

Remote Controller (Wireless Type)
(2) Setting the address of wireless remote controller (It is factory set to " 1 " )
Setting from the remote controller
〈
1. Hold down the
button for at least 4 seconds to get the Field Set

mode.

(Indicated in the display area in the figure at right.)
2. Press the
setting (A/b). Each time the button is pressed the
display switches between "A" and "b".
3. Press the "
address.
Address can be set from 1 to 6, but set it to 1 ~ 3
and to same address as the receiver. (The receiver
does not work with address 4 ~ 6.)
4. Press the
5. Hold down the
second to quit the Field Set mode and return to the
normal display.
Multiple settings A/b
When the indoor unit is being operating by outside control (central remote controller, etc.), it sometimes
does not respond to ON/OFF and temperature setting commands from this remote controller. Check what
setting the customer wants and make the multiple setting as shown below.
Multiple setting
A: Standard
b: Multi System
(3) Stick the Unit No. label on
the air outlet of the
decoration panel and the
back of the wireless remote
controller.
[PRECAUTIONS]
Set the Unit No. of the receiver
and the wireless remote controller
to be equal. If the settings differ,
the signal from the remote
controller cannot be transmitted.
66
〉
button and the
FAN
button and select a multiple
" button or " " button to set the
UP
DOWN
1 2 3 4 5 6
button to enter the setting.
RESERVE
button for at least 1
/TEST
Remote controller
Remote controller display
All items displayed.
Operations remain displayed
shortly after execution.
Unit No. label
/TEST
Mode
SETTING
Address
Multiple
setting
Movement when the operation is controlled by the other
air conditioners and equipment
When operation changeover, temperature setting or the
like is carried out from the remote controller, the indoor
unit rejects the instruction.
(Signal receiving sound "peeh" or "pick-pick-pick")
As a result, a discrepancy between the operation state of
the indoor unit and the indication of the remote controller
display occurs.
Since the indication of the remote controller is turned off,
no discrepancy such as mentioned above occurs.
<Attachment of Unit No. label>
OH08-1
ON OFF
3
TEMP
TIME
UP
DOWN
FAN
2
RESERVE CANCEL
TIMER
4
MODE
SWING
1
/TEST
5
Control Systems