Fuel Tank Removal; Fuel Tank Installation - Toro Groundsmaster 4500-D Service Manual

Fuel Tank Removal

1. Park machine on a level surface, lower cutting units,
stop engine, engage parking brake, and remove key
from the ignition switch.
2. Disconnect fuel hoses from the suction and return fit-
tings in top of tank.
3. Use draincock to empty fuel tank into a suitable con-
tainer.
4. Remove fuel tank using Figure 7 as a guide.
Groundsmaster 4500--D/4700--D

Fuel Tank Installation

1. Install fuel tank to frame using Figure 7 as a guide.
2. Connect fuel hoses to the suction and return fittings
in top of tank.
3. Make sure that draincock is closed.
4. Fill fuel tank (see Traction Unit Operator's Manual).
Page 3 - - 9 Kubota Diesel Engine (Rev. A)