Skoda Radio Blues Owner's Manual page 9

Please also note the additional information for MP3 mode .
■
The national copyright laws that apply in your country must be observed.
■
The CD-player does not contain parts that need to be serviced or repaired. In
■
the case of a defective CD player, visit a ŠKODA specialist garage.
If the ejected CD is not taken out, it will be retracted again for safety reasons.
■
If the radio is functioning in the TP mode before changing to the CD mode, the
■
play function of the CD is interrupted during the traffic reports and the unit
switches over to the radio mode. After the traffic reports have ended, the unit
switches back once again to the CD mode.
Function SCAN
Consecutive play back of each title for the first 10 seconds.
›
Press the settings knob briefly to start scrolling through the CD.
2
›
To return to normal operation, press the menu knob
›
To select the previous or next track, press
Replay the tracks in random order
›
Press the key to select the setup menu.
MENU
›
Use the function key buttons to select the menu function MIX
›
Select the desired level using the adjustment knob
MIX
Play function of titles in random order.
›
MIX OFF - the menu is switched off;
›
MIX CD - plays the tracks on a CD in random order;
›
MIX FLD - Play function of titles in random order in a certain (folder);
›
MIX PLS - Play function of the playlist (folder of selected tracks from individual
folders, which is stored on the CD). Is only displayed when a playlist is created
for the replayed CD.
General information for MP3 operation
Requirements for the MP3 data and data carrier
›
CD-ROM, CD-R, CD-RW with a capacity of 650 MB and 700 MB.
›
The CDs must correspond to the ISO 9660 Level 2 standard as well as the Joliet
data system (single and multi-session).
›
Data names must be no longer than 64 characters.
again.
2
or .
 
.
8
.
1
›
The list structure is restricted to a depth of 8 list levels.
›
The name of the artist, the album and the title of the MP3 file being played can
be shown, providing this information is available as ID3 tag. The list and data
name will be displayed if there is no ID3 tag.
›
Playlists are not supported.
Display of additional information (MP3 data)
By pressing the function button INF
be selected to appear in the display.

Bit rate (data flow per time unit)
›
The system supports MP3 data with bit rates of 32 to 320 KB/s as well as MP3
data with variable bit rates.
›
The indicated playing time data with variable bit rates is not reliable.


additional information about MP3 files can
8
CD player

7