Home Channel; Rental - RCA BRM1250 Instruction Manual

24
down to initiate the PA process, and the LCD
will display PA ON. When the PA process
initiates in PA mode, you can adjust the
volume via the volume control knob.
4. Release the PTT key to end the PA process,
and the radio will return to the PA mode,
and the LCD will display PA.
Note:
If operating the PA system, the optional PA
accessories and external speaker must be
installed by your dealer.

HOME CHANNEL

Press the programmed Home Channel
key, and the radio will promptly go to the
programmed home channel.
When dual home channels are set, press the
programmed Home Channel key to promptly
go to Home Channel 1, press again to promptly
go to Home Channel 2, and press for the third
time to return to the original channel.
Copyright © 2011 Discount Two-Way Radio Corporation - North American Distributor
BRM1250 Professional Mobile Two-Way Radio Instruction Manual
TM

RENTAL

Display Format:
Press the Rental key (programmable function
key), and the LCD will display the remaining
rental time by 2 time units such as "13D 21H".
The LCD will display the hour and minute such
as "14H 30M" if the remaining time is less
than one day, or the minutes only such as
"30MIN " if less than an hour.
Auto Reminder:
1. Reminds you of the remaining rental time
every time the radio is powered on (last for 5
seconds).
2. Reminds you every 20 minutes if the
remaining rental time is less than one hour.
(with displayed remaining rental time and
beeps for 5 seconds)
3. Reminds the rental time status during the
last minute of the rental time (with displayed
EXPIRING and beeps).