Code Squelch; Off Hook Decode - RCA BRM1250 Instruction Manual

20

CODE SQUELCH

This feature can be enabled/disabled by your
dealer. If it is enabled, the preset 2-Tone will
control the radio mute/unmute. The radio will
not unmute until matched signaling is received.
Clear Stored DTMF Numbers
1. Radio is unmuted when the matched 2-Tone
signaling (programmed by your dealer) is
received, and the user can hear from the
transmitter without any other operation.
2. The icon flashes on the LCD, and the
LED flashes orange.
3. The radio is muted upon the programmed
Monitor key press, or no signal is received
within the preset time period.
4. If the alert tone is enabled, radio will emit an
alert tone when match signaling is received.
If the Transpond feature is enabled, the radio
will transmit a tone to the calling radio.
However, the radio will not transmit if a zone
call is received.
Copyright © 2011 Discount Two-Way Radio Corporation - North American Distributor
BRM1250 Professional Mobile Two-Way Radio Instruction Manual
TM
Transmit
1. Hold down the PTT key
2. During encoding, the LED lights red.
3. Please refer to the TTS key for 2-Tone
encoding.
4. Upon releasing the PTT key, the signaling
squelch is disabled, the
on the LCD, and the LED flashes orange. The
LED lights green while signal is received and
flash orange if signal off.
5. If the programmed Monitor key is pressed
or no signal is received within the preset time
period, the signaling squelch is enabled.

OFF HOOK DECODE

If this feature is enabled by your dealer, CTCSS/
CDCSS signaling is active no matter whether
the palm microphone is in an off hook position
or not. If the feature is disabled, CTCSS/
CDCSS signaling is disabled when the palm
microphone is in the off-hook position.
icon flashes