BRM1250
Revert Channel
If you press the PTT key, the scan will be
turned off and the radio will switch to the
Revert Channel to transmit. This feature is
programmable by your dealer.
Off-Hook Scan
If this feature is enabled by your dealer, the radio
will be allowed to scan no matter whether the
palm microphone is in an off- hook position or
not. Otherwise, the scan will be disabled with
an off-hook palm microphone.
BUSY CHANNEL LOCKOUT (BCL)
This feature helps prevent transmission on a
channel that is already in use, and it can be
enabled/disabled by your dealer. If you press
the PTT key on a busy channel, transmission
will be inhibited and an alert tone will sound.
If the PTT key is released, the alert tone will
cease, and the radio will return to Rx mode.
When the channel is free, press the PTT key
again to transmit.
Copyright © 2011 Discount Two-Way Radio Corporation - North American Distributor
Professional Mobile Two-Way Radio Instruction Manual
TM
BCL OVERRIDE
If this feature is enabled, you can override the
BCL feature to transmit on a busy channel.
If you press the PTT key, a BCL alarm will
be heard; press the PTT key again within
0.5 seconds to override the BCL feature and
transmit on the busy channel.
DTMF CALL
Manual Dial
Hold down the PTT key, and then press any
key on the DTMF keypad of the microphone
to transmit the corresponding DTMF signal.
Meanwhile, you may hear relevant tones.
Release the PTT key. The radio will remain
in
(programmable by your dealer), and then
press another numeric key within 2 seconds to
continue the transmission.
transmission
mode
for
17
2
seconds