Adjusting The Harness Buckle Position - Britax ROUNDABOUT User Manual

6. Before reattaching the
harness straps to the
yoke, hold the harness
yoke as shown, and
ensure that the adjuster
strap attached to the yoke
is not twisted.
7. Slide nested harness
straps completely onto
the harness yoke.

Adjusting the Harness Buckle Position

• For rear-facing installation:
– ALWAYS position the buckle in
the inner slot for when using a
vehicle seat belt installation.
– The vehicle belt must pass in
front of the buckle strap.
– Position the buckle in the
slot closest to but not under the child when using the
LATCH installation.
• For forward-facing installation, use the outer buckle slot
when installing the child seat with a child weighing 30 lbs
(13.6 kg) and above or if the buckle is under the child in
the inner position.
• NEVER leave the buckle in the adjustment slot.
1. Unbuckle the harness.
Remove the belly pad and
push the buckle through
the cover.
2. Turn the buckle webbing
and slide it between
buckle positions.
3. Slide the buckle retainer
into the buckle slot, and
ensure the red release
button faces out.
Roundabout G4_1.indb 23
ROUNDABOUT User Guide
6
Adjuster
Strap
7
ADJUSTMENT
SLOT
23
9/23/2014 8:43:42 AM