If a problem should develop while operating the CD changer, the error code "Err" may appear on the display
panel. This can indicate a number of problems with the unit, including a mechanical error or an error in the
microprocessor control of the changer. If the error code should appear, try ejecting and re-loading the magazine
into the changer. While the magazine is out of the changer, make sure the discs are clean, undamaged, and
loaded correctly (see Owner's Manual of the CD changer). You may also try activating the RESET button
on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further
assistance.
14 14 14 14 14
CD CHA A A A A NGER ERR
CD CH
CD CH
NGER ERR
NGER ERR
CD CH
CD CH
NGER ERR
NGER ERROR CODES
OR CODES
OR CODES
OR CODES
OR CODES
ct