Ballast (additional weight) is an important part of
qualifying vehicles for snowplow eligibility. Rear
ballast must be used when necessary to remain in
compliance with axle ratings and ratios as specifi ed
by the vehicle manufacturer. If ballast is required, it
is important that it be secured properly behind the
rear axle. A ballast retainer kit is available from your
BLIZZARD
®
outlet, PN 62849.
NOTE: The ballast retainer kit is for snowplow
vehicles requiring ballast. See your BLIZZARD
outlet for the correct amount of ballast required.
Include the weight of the retainer as part of the
ballast requirement. Sandbags are recommended
for use as ballast.
Lit. No. 40688, Rev. 04
ACCESSORIES & OPTIONS
Ballast Retainer
15
Driver-Side
Passenger-Side
Ballast Retainer
May 1, 2012