Table of Contents
Advertisement
EN
1.2. Signal words according to ISO 3864 and ANSI Z.535
Imminent danger
DANGER!
Consequences of non-compliance: serious personal injury or death
Potential danger
WARNING!
Consequences of non-compliance: possible serious personal injury or death
Imminent danger
CAUTION!
Consequences of non-compliance: possible personal injury or damage to property
Additional notes, tips and hints
NOTICE
Consequences of non-compliance: Disadvantages in operation and maintenance.
No hazards for people.
1.3. Safety instructions
DANGER!
Escaping compressed gas
Risk of serious personal injury or death caused by suddenly released compressed gas, condensate on
unsecured device components.
•
•
•
•
•
•
DANGER!
Mains voltage
Risk of injury or death from electric shock when coming into contact with non-insulated, energised
parts.
•
•
•
•
•
•
WARNING!
Operation of device outside limiting value range
If the specified limiting values are undershot and/or exceeded, then there is a risk of device or
operating malfunctions.
•
•
•
Specialist technical personnel
1
Specialist technical personnel are considered to be people who, due to their professional qualification and knowledge in
the technical fields for measuring, controlling, regulating and compressed air as well as having experience and knowledge
with regard to country-related applicable statutory provisions, regulations, standards and guidelines and are independently
capable of executing the described works and foreseeing potential hazards. Special assignment and/or operating conditions
demand additional knowledge e.g. With regard to aggressive media.
DRYPOINT
M eco control
®
Only execute assembly, installation or maintenance works when the system is depressurised.
These works may only be executed by authorised specialist technical personnel
Always utilise pressure-resistant installation materials and suitable tools that are in proper
working order.
Always inspect all plant and system parts and, if applicable, repair them before pressurising the
system. Open valves slowly to prevent pressure blow outs during operation.
Always prevent that people or objects can be affected condensate or escaping compressed gas.
Protect the device parts against vibrations, oscillations and impact.
Perform a leakage test.
Comply with all applicable regulations (e.g. VDE 0100 / IEC 60364) for electrical installation
works.
Only execute installation and maintenance works when the system has been deenergised.
Electrical works may only be executed by authorised specialist technical personnel
The permissible operating voltage is printed on the rating plate and must be strictly adhered to.
Only utilise components for the electrical installation which have a current approval
and are labelled with a CE-Identification Marking.
A safely accessible circuit breaker (e.g. power plug or switch) must be provided close to the unit
for disconnecting all current and/or power lines for the voltage supply.
The device must only be operated for the intended purpose and within the permissible limiting
values specified on the rating plate as well as those listed in the technical data.
Strictly adhere to the prescribed operating times and maintenance intervals.
Strictly adhere to the prescribed storage and transport conditions.
Installation and operating manual
.
1
.
1
5
Advertisement
Table of Contents
