Table of Contents
Advertisement
EN
4.3. Opening the control unit
For the electrical connection of the 4 ... 20 mA interfaces and/or the alarm contact, the housing of the control unit must be
opened. Loosen the 4 housing screws, using a 2 mm Allen key to perform this task. The cable insertion will be executed via
the provided armoured conduit fitting (1) or (2).
The cover of the control unit can be subsequently lifted off. Hereby ensure that the ribbon cable (3) will not be crushed or
torn off.
DRYPOINT
M eco control
®
1
X4.5
X4.4
X4.5
X4.3
X4.4
X4.3
X4.2
X4.2
X4.1
X4.1
Installation and operating manual
2 mm (0,08")
1
2
3
2
23
Advertisement
Table of Contents
