Sony SAL50F14 Service Manual page 41

4-6-2. Focus Brush Position Adjustment and Pattern Check
Equipment
• Personal Computer (PC)
• Camera DSLR-A100
• USB Cord With Connector
• Adhesive bond (B-10)
• Lens Adjustment Program
Note:
Lens Adjustment Program is downloadable from the ESI homepage.
1. Focus Brush Position Adjustment
1) Remove the hold sheet, hold sheet tape and brush hole cover, and loosen the two screws fixing the focus brush.
Hold Sheet
Brush Hole Cover
Hold Sheet Tape
Two screws
Focus Brush
Fig. 4-6-5
2) Set the focus position to infinity end.
3) Perform the "4-6-1. Focus Brush Position Check", and adjust the focus brush position until the OK (Green) indicator of "Position"
lights.
Fig. 4-6-6
4) Tighten the two screws loosened in step 1).
SAL50F14 (1.4/50) (50mm F1.4)
4-18