Using Direct Entry - RCA RC5231Z User Manual

Rca digital video disc player user's guide
Table of Contents

Advertisement

Using Direct Entry

1. Turn on the component to be programmed.
2. Look up the brand and code number(s) for the component on the
code list in this section.
3. Point the DVD Player's remote at the component.
4. Press and hold the component button on the remote you want to
program.
5. Enter the code from the Remote Control code list (pp. 86-87).
6. Release the component button, and then press ON•OFF to see if
the component responds to the command. If it doesn't, try
pressing the component button and then ON•OFF again.
7. If you get no response, repeat these steps using the next code
listed for your brand, until the component responds to the remote
commands.
To operate another component after you've
programmed the remote control:
1. Press the appropriate component button (TV, VCR1, VCR2, DVD,
AUX or SAT•CABLE) to set the remote to control the component.
2. Press ON•OFF to turn the component ON or OFF.
3. Use the remote buttons that apply to that component.
Modes of Operation
Because this universal remote can control several different components
(DVD player, VCR, cable box, etc.) it uses operational modes triggered
by the component buttons. For example if you want the remote to
control the TV, you would press the TV button to put the remote into
TV mode before you could control the TV.
Note:
This remote may not be compatible with all brands and models of
components.
Reference
ON OFF
VCR1
DVD
VCR2
AUX
SAT CABLE
PLAY MODE
MUTE
REPEAT
GO BACK
GUIDE
OK
SELECT
MENU
3
1
2
4
5
6
7
8
9
INPUT
ANTENNA
0
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
SUBTITLE AUDIO ANGLE FRAME
This Is Important!
You must continue pressing the
component button while you enter the
code.
Let's say you have a Zenith TV. To
program the remote to operate the TV
you would:
Press and hold the TV button while you
enter the first code listed for Zenith in
the TV Codes column.
Release the TV button. Press ON•OFF
to see if the TV responds. If it doesn't,
follow the same steps, but enter the
second code instead of the first.
TV
INFO
CLEAR
85

Advertisement

Table of Contents
loading

Table of Contents