Other Remote Control Buttons - RCA RC5231Z User Manual

Setup and Connections
Other Remote Control Buttons (listed
alphabetically)
This section describes what each button does when
the remote is operating the DVD Player. You put the
remote in "DVD mode" by pressing the DVD button
on the remote.
The buttons on the remote may operate differently when the remote
is controlling other components.
Example: When the remote is operating the DVD Player, pressing
CH+ takes you to the beginning of the next chapter or track on the
disc. When the remote is operating the TV, pressing CH+ takes you to
the next channel.
Arrow buttons Use the arrow buttons (left, right, up, and down) to
move through the on-screen menu. You highlight a menu item by
pressing the arrow buttons. You select a highlighted item by pressing
the OK button.
ANGLE Press this button to access various camera angles on a disc
(if the disc contains multiple camera angles).
ANTENNA Lets you change the source of the video signal from
satellite signals to an off-air antenna or cable signal and vice versa.
AUDIO Use this button to access various audio languages on a disc
(if te disc contains multiple audio streams).
CH+ Allows you to move to the beginning of the next chapter or
track on a disc (in effect, "skipping" the chapter or track).
CH– Allows you to move to the beginning of the preceding chapter
or track on a disc (in effect, "skipping" the chapter or track).
CLEAR Clears the Info Display from the screen when you're playing
a disc. When you're using the DVD Player's menu system, press
CLEAR to go back to the DVD Player's main menu.
FORWARD Allows you to search forward through a disc while it is
in play mode (or slow speed search in pause mode).
16
ON OFF
VCR1 TV
DVD VCR2 AUX SAT CABLE
PLAY MODE
MUTE
REPEAT GO BACK
GUIDE INFO
OK
SELECT
MENU CLEAR
1 2 3
4 5 6
8
7 9
INPUT ANTENNA
0
REVERSE PLAY FORWARD
STOP PAUSE
RECORD
SUBTITLE AUDIO ANGLE FRAME
NOTE: The remote packed with
your DVD Player is programmed
to operate most RCA, GE, and
PROSCAN components. The
remote can also operate other
brands of electronics components,
but you must program it to do so
(see page 86).