Dvd Player + Tv + Vcr - RCA RC5231Z User Manual

TV
S-VIDEO VIDEO IN
DVD
VIDEO OUT AUDIO OUT
PLAYER
DIGITAL
AUDIO
S-VIDEO R L
OUT
VCR
L
R
OUT
AUDIO VIDEO
IN
L
R

DVD Player + TV + VCR

1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD
Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input
jack on your TV.
3. If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your
DVD Player and to the S-Video jack on your TV. If your TV doesn't have an S-VIDEO jack, skip this step.
4. Connect the antenna or cable to the Antenna Input jack on the VCR.
5. Connect a coaxial cable to the antenna output jack on the VCR and to the Antenna Input jack on the television.
6. If the telephone line cord packed with your DVD Player has a filter attached to one end of the cord, insert that end
of the telephone line cord into the PHONE JACK on the back of your DVD Player. Plug the other end into the
telephone line splitter (provided), and insert the telephone line splitter into a phone jack.
If the telephone line cord doesn't have a filter attached to it, just insert one end into the DVD Player's PHONE
JACK and insert the other end into the telephone line splitter. Insert the telephone line splitter into a phone jack.
7. Insert the AC power cord into the AC IN jack on the back of your player and into an AC outlet.
8. Turn on your television and tune it to the Video Input Channel. (If you don't know what channel is the Video
Input Channel, please see p. 14).
9. Turn on your DVD Player.
To Watch the VCR
Tune your television to channel 3 or 4 depending on how you set the CH3/4 switch on the back of the VCR.
AUDIO OUT
L R
AUDIO IN
L R
RF ADAPTER
AC IN
PHONE
JACK
To Telephone Outlet
OUT TO TV
IN FROM ANT
Setup and Connections
Don't Connect VCR directly to Your
DVD Player
ANT IN
Many DVD discs are encoded with copy
protection. Because of this, you should
only connect your DVD Player directly to
your TV, not to a VCR. Connecting to a
VCR results in a distorted picture from
copy-protected discs.
CAUTION
To AC Outlet
Do not stack electronic components or
CABLE other objects on top of the DVD Player.
OR
OFF-AIR SIGNAL
See Safety Information on the inside
front cover.
9