Snmp Provisioning For Backup & Restore; Reboot & Reset - Technicolor CGM4231 Operation Manual

The user can back up the configuration data to a specific file or restore the already backed up
data from a file.
Figure 10.4
SNMP Provisioning for Backup & Restore
10.4.2
tchRgDeviceConfigBackup MIB set is used for this.
tchRgDevConfBackupServerType defined as IPv4 for future usage.
tchRgDevConfBackupServer - The address of the TFTP server used for Wireless Gateway
config download or upload. If the TFTP server is unknown, return 0.0.0.0.
tchRgDevConfBackupOperStatus InProgress(1) indicates that a TFTP download or upload is
underway, Complete(2) indicates that the last download or upload is successful, failed(3)
indicates that the last attempted download or upload is failed.
tchRgDevConfBackupAdminStatus. If set to download(1), the device will initiate a TFTP
Wireless Gateway config file download using remoteProvisionFilename. If set to upload(2), the
device will initiate a TFTP Wireless Gateway config file upload to remoteProvisionServer. The
filename will be the same as remoteProvisionFilename. At initial start-up, this object has the
default value of download(1).
10.5 Reboot & Reset
Administration Tab / Reboot & Reset
Click on the Administration tab and then the Reboot & Reset tab. The page displays Reboot
and Reset options:
Reboot
1/8/2018 Proprietary and Confidential - Technicolor 95