The user can configure the VPN Tunnel details by clicking on '+' symbol corresponding to the
VPN Tunnel option. The page will show the following information:
Enable (Option to enable VPN),
•
Tunnel Name (Name of the tunnel to be created between endpoints)
•
Local Secure Group: - (IP Address, Subnet Mask)
•
Remote Secure Group: - (IP Address, Subnet Mask)
•
Remote Secure Gateway: - (IP Address)
•
Key Management: - (Key Exchange Method, Encryption Algorithm, Authentication
•
Algorithm, Pre –Shared Key, Key Life Time)
•
1/8/2018
Figure 8.7
Proprietary and Confidential - Technicolor
78