Snmp Provisioning For Radio; Security - Technicolor CGM4231 Operation Manual

Note:
1. Option 2. 20/40 MHz is possible in 2.4 GHz or 5 GHz wireless interface but only when
Network mode include 802.11n or 802.11ac, is not possible with selection of only 802.11
b/ 802.11g /802.11a mode.
2. Option 3. 20/40/80 MHz is only possible with 5 GHz and network mode includes 802.11
ac.
Channel:
User can select any channel from the available drop down list or can select the gateway to
operate in AUTO mode where the gateway will automatically select the best channel for the
location in which it is installed. AUTO mode is the recommended setting so in order that the
gateway may continuously scan and select the channel with lesser interference and
congenstion from neighboring wireless networks.
Radio Power:
User can select Radio power from Radio Power drop down list.
MAC Address:
Mac address is reflected by this tab.
Scan Nearby AP:
The Scan button provides a mechanism for the AP to scan neighbouring APs and provides
various statistics on neighbours.

SNMP Provisioning for Radio

7.1.2
tchRgdot11nExtMode selects the network mode.
tchRgdot11nExtBandWidth selects the channel width for 802.11n operation.
tchRgdot11nExtSideBand - This is for N cards only.
tchRgDot11ExtCurrenannelselects the channel. The list of the available channels depends on
the radio capabilities and country code.
tchRgDot11BssSsid sets the network name (SSID), Controls and reflects the service set
identifier.
tchRgDot11BssClosedNetwork controls whether the network name (SSID) will be hidden in
the beacon frames or not

7.2 Security

Wireless Tab / Security
Click on the Wireless tab then click on Security tab. The page displays radio setup information at
2.4 GHz and 5 GHz. Here the user can set and display Wireless Network (2.4 GHz and 5 GHz)
information including the Network Name, Security Mode, Encryption, Network Password, and
Key Interval.
1/8/2018 Proprietary and Confidential - Technicolor 54