Site Filter; Snmp Provisioning For Site Filter - Technicolor CGM4231 Operation Manual

8.4 Site Filter

Site Filter page is used to block websites based on user necessities. User can add the desired
website under the Blocked sites and the added website will be blocked for both LAN and WLAN
devices, which are connected through the router.
Security Tab / Site Filter
Click on the Security tab then click on Site Filter tab. This page displays following Site Filter
setup information which can be viewed and set by user:
Site Filter Status: (Enabled / Disabled)
•
Blocked Sites: (Content, Type, When, Delete)
•
Trusted Devices: (Computer Name, MAC Address, IP Address, Trusted)
•
The filter would be applied to all the devices in the trusted list. The user can edit/modify the filter
setting to block the sites always, block on specific day, specific time, etc. The user also can
remove the sites from the trusted devices list to remove the filter option for them.
The user needs to edit and press the Save button in the page to set the desired configuration.

SNMP Provisioning for Site Filter

8.4.1
Following MIBs are used to provision the Site Filter feature:
tchRgFirewallUrlKeywordFilterIndex - Main Index
•
1/8/2018
Figure 8.4
Proprietary and Confidential - Technicolor 74