Siemens SIPROCESS GA700 Quick Start Manual page 60

Commissioning
7.7 [2.09.3] Digital inputs
4. Select function (pre-selection) and functions of the digital input: "Function (pre-selection)"
5. Set additional parameter fields or check displayed values:
60
and "Function" parameter fields.
Use the information in the tables below when setting the pre-selection:
– Table 7-2 Function assignment at function (pre-selection): "Free" (Page 55).
– Table 7-3 Function assignment at function (pre-selection): "Ext. fault", "Ext. maint.
alarm", "Ext. maint. demand" or "Ext. maint. required" (Page 56).
– Table 7-4 Function assignment at function (pre-selection): "Ext. funct. check"
(Page 56).
– Table 7-5 Function assignment at function (pre-selection): "Calibration" (Page 56).
– Table 7-6 Function assignment at function (pre-selection): "AutoCal" (Page 57).
– Table 7-7 Function assignment at function (pre-selection): "Measuring range"
(Page 57).
– Table 7-8 Function assignment at function (pre-selection): "Other functions"
(Page 58).
Additional parameter fields are displayed, depending on the set pre-selection or function.
Function (pre- Additional
selection) parameter fields
Ext. ... Text
Measuring range Component
Calibration pool Diverse
1
The display refers to a specific calibration pool entry and includes: component(s), calibration
1)
type, single/total calibration as well as the assigned measuring range.
Activity
Enter free text.
Select component.
Check the parameter assignment of the calibration pool
1)
entry.
Compact Operating Instructions, 01/2013, A5E31805656-01
Quick Start