Access Via Cli - THOMSON SpeedTouch 536 User Manual

1.3.2 Access via CLI

Command Line
Interface (CLI)
E-DOC-CTC-20050429-0099 v1.0
You can access the Command Line Interface (CLI) via:
A Telnet session
This requires that TCP/IP connectivity exists between the host from which the
Telnet session is opened and the SpeedTouch™. Your SpeedTouch™ and the
connected PC must have an IP address in the same subnet.
Quote site commands (over FTP)
For more information, see
For information on CLI commands, see the SpeedTouch™ CLI Reference Guide.
" Quote site command" on page
Chapter 1
Your SpeedTouch™
15.
11