CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.
To remove the component:
Power down the partner server blade (on page 22).
1.
Remove the storage blade (on page 22).
2.
Remove the front panel.
3.
To replace the component, reverse the removal procedure.
LED panel
WARNING:
internal system components to cool before touching them.
CAUTION:
before beginning any installation procedure. Improper grounding can cause ESD.
To remove the component:
Power down the partner server blade (on page 22).
1.
Remove the storage blade (on page 22).
2.
Remove the front panel
3.
To prevent damage to electrical components, properly ground the storage blade
To reduce the risk of personal injury from hot surfaces, allow the drives and the
To prevent damage to electrical components, properly ground the storage blade
("Front
panel" on page 31).
Removal and replacement procedures 32